Ellisys Download | Purchase | Contact | About | Jobs      
Protocol Analyzers
USB Explorer 280 (5G)
  Overview
  Screenshots
  Technical Data
  Purchase
  Download
   
Quick Links
  Software Download
  Datasheet
  Analyzer Manual
  Generator Manual
   
Related Products
  USB Explorer 350 (10G + PD)
  USB Explorer 260 (USB 2.0)

Ellisys USB Explorer 280 -
Technical Data

Download the datasheet »
Download the software »

Specifications

Analyzer Characteristics

  • Supported specifications: USB 3.0, USB 2.0, and USB 1.x
  • Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
  • Timestamp accuracy: 2ns for USB 3.0, and 16.7ns for USB 2.0/1.x
  • Low-level error detection: CRC-5, CRC-16, CRC-32, state transition errors, invalid PID, framing errors, frame sequence errors, length errors
  • Bus states: detection of SuperSpeed link operating states and all USB 2.0/1.x electrical bus states

Generator Characteristics

  • Supported specifications: USB 3.0, USB 2.0, and USB 1.x
  • Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
  • Supported modes: host or device emulation
  • Timing: 2ns for USB 3.0, and 16.7ns for USB 2.0/1.x

Embedded Memory

  • 4 GBytes of FIFO Memory
  • Data is stored in highly optimized format
  • Analyzed data is uploaded in real time through a USB connection

Front-panel Connectors

  • Link under test: USB 3.0 STD-A and STD-B

Rear-panels Connectors

  • Computer interface: USB STD-B
  • Auxiliary equipment: supports connection of extension boards
  • SMA trigger: in and out, 50 Ω, max 5VDC
  • Inter-equipment: in and out, supports connection of several units together
  • Power: Max 25W

Power Supply

  • 12VDC nominal (accepts up to 24VDC)
  • Universal 90-264VAC, 47-63Hz, Energy Star

InstantTiming™ View

  • Nanosecond-precise display
  • Automatic quotes of important timings
  • Concurrent USB 2.0 and USB 3.0 display, as well as Vbus voltage and power display

Front-panel Indicators

  • Power: unit powered on
  • Operating: unit performing requested task
  • Trigger: trigger event detected
  • Link, Receive and Transmit for US and DS

Enclosure

  • 174 x 111 x 58 mm (6.9 x 4.4 x 2.3'')
  • 1.2 kg (2.6 lbs)

Hardware Upgrade

  • The decoding engine is automatically updated with each software release
    (no user intervention required)

Product Warranty

  • Two years warranty

Minimum Requirements

  • Pentium 4, 1 GHz or compatible processor
  • 1 GBytes of RAM
  • 1280 x 1024 display resolution with at least 65,536 colors
  • USB 2.0 host controller
  • Windows® Vista SP2 or higher

Ellisys reserves the right to change the features and specifications of the product without notice.

Next page »

More

» Software Download
» Technical Specifications
» Purchase

 ©  2017  Ellisys. All rights reserved - Terms of Use - Privacy Statement - Write to the webmaster