Ellisys USB Explorer 350 - Technical Data

Specifications

Connectors

• Link under test: Std USB 3.1/PD A and Std USB 3.1/PD B
• Logic: 2 x 8 inputs / outputs with configurable level and threshold
• Sync: Ability to synchronize units by sharing the same clock
• Control: Optimized USB 3.0 connection to the PC
• Power: 9-24VDC, min 12W

Supported Protocols

• Power Delivery 3.0 (Baseband)
• USB 1.0 / USB 1.1 (1.5 and 12 Mbps)
• USB 2.0 (1.5, 12 Mbps and 480 Mbps)
• USB 3.0 (5 Gbps)
• USB 3.1 (10 Gbps)
• The availability of the protocols depends on the edition and options

Supported Modes

• Analyzer: non-intrusive protocol analyzer
• Generator: traffic generator for emulating host, device, sink, source
• Examiner: compliance tester
• The availability of the modes depends on the edition and options

Analyzer Capabilities

• Concurrent capture of USB 2.0, USB 3.x, Power Delivery, Vbus and logic signals
• Multiple-unit synchronization capability
• Automatic termination detection
• Pre-capture traffic filtering

Generator Capabilities

• Simulate USB host or device
• Simulate PD sink or source
• Precise and reproducible timings
• Ability to emulate low-level issues as well as high-level behaviors

USB 1.x / 2.0 Capabilities

• Support of Low-speed, Full-speed and High-speed
• Automatic speed detection
• Precise tracking of line states
• Non-intrusive probing
• Timing resolution of 16.7 ns

USB 3.x Capabilities

• Support of 5 Gbps and 10 Gbps
• Automatic speed detection
• Automatic termination detection
• Non-intrusive signal reshaping
• Flexible front-end with adaptive equalization and configurable emphasis and swing
• Timing resolution of 400 ps

USB Power Delivery Capabilities

• Non-intrusive probing
• Support of FSK PHY
• Support of Baseband PHY
• Support of Type-C CC via custom cable
• Measurement of FSK carrier frequency, amplitude and bit rate
• Configurable FSK amplitude in generator mode

Vbus Capabilities

• Measurement of Vbus from 0 to 25V
• Measurement of Ibus from -5 to +5A
• Generation of Vbus from 4 to 20V

Logic Capabilities

• 16 inputs / outputs
• Configurable level and threshold (2 banks of 8 signals)
• Timing resolution of 400 ns
• Bandwidth of 50 MHz

Power Adapter

• Universal 100-240 VAC, 50-60 Hz
• 24 VDC, 18 W

Enclosure

• 96 x 96 x 16 mm (3.8 x 3.8 x 0.6'')
• 0.3 kg (0.6 lbs)

Maintenance and Licensing

• Free lifetime updates – no maintenance fees
• Free full-featured viewer application – easily share annotated traces between computers and colleagues and replay captured traffic
• Use Ellisys hardware on any computer – no additional licenses needed

Product Warranty

• Two years limited warranty

Minimum Requirements

• Pentium 4, 1 GHz or compatible processor
• 1 GBytes of RAM
• 1280 x 1024 display resolution with at least 65,536 colors
• USB 2.0 host controller
• Windows® Vista SP2 or higher

Ellisys reserves the right to change the features and specifications of the product without notice.

Next page »